Installation - Panasonic NA-W120G1 Operating & Installation Instructions Manual

Installation

Make sure to ask a service person for installation. Do not install by yourself.
If the installation, test run and inspection of the washing machine are not carried out following this installation
method, Panasonic will not be liable for any accident or damage caused.
Installing this Washer should be
settled in a well-ventilated, safe
place and where can connect the
drain hose and the power supply.
It is recommended to place the
washer on a level floor and avoid
a place where the washer can be
exposed to direct sunlight.
The inlet hose connector, which supply
the water into the washing tub and
spin tub can be adjusted.
Inlet hose
Connect inlet hose to water tap by pushing it until the water tap reach
the innermost part of inlet hose's end.
Adjust it to correct and firm position.
Connect to the inlet hose
connector.
Insert the power plug firmly into
the power outlet.
Pull out the drain hose from the
washer. When using the washer
for the first time, you may find
water remaining in the drain
hose. It was used for the factory
performance test. It does not
imply any malfunction.
R
T
5