Operation; Mute Button; Redial Button - Doro Congress 100 Quick Manual

English

Operation

Mute button

The handset/headset microphone can be muted during a call by pressing the
mute button . Press the mute button again to activate the microphone. The
z
LED next to the button flashes when the microphone is muted.
Making a call with the headset
1. Press the headset button
. A dialling tone will be heard in the headset and
=
the LED next to the headset button will illuminate.
2. DIAL the NUMBER required.
3. Press the headset button again to terminate the call.

Redial button

If the number dialled is engaged or if the last number dialled is to be redialled,
lift the receiver or press the headset button .
=
Press the redial button .
r
On Hold
Press the hold button to place a call on hold. The LED next to the button
h
will illuminate. The call can be resumed by pressing the hold button again or
from another telephone connected to the same line.
When a call is connected.
Press the button to hold the telephone call. The LED above the button will
h
illuminate.
To resume the telephone call, lift any receiver.
Recall
Press the recall button R followed by the extension number to transfer calls
when connected to a PBX.
Access to additional network services can be gained by using the recall button
R,
and keys. Contact your network operator for more information.
* #
EN 2 www.doro.com