Intended Use; Using Your Mask - ResMed AirFit P10 User Manual

English
AirFit P10
N P
ASAL ILLOWS
Thank you for choosing the AirFit P10. Please read the entire manual
before use. This document provides the user instructions for the
AirFit P10 and AirFit P10 for Her masks referred to collectively as
AirFit P10 throughout this manual. AirFit P10 has blue headgear
while AirFit P10 for Her has pink headgear.
Refer to the illustrations and mask components diagram to
supplement the step-by-step procedures within this manual.

Intended Use

The AirFit P10 channels airflow noninvasively to a patient from a
positive airway pressure (PAP) device such as a continuous positive
airway pressure (CPAP) or bilevel device.
The AirFit P10 is:

to be used by patients (> 66 lb (30 kg)) for whom positive airway
pressure has been prescribed

intended for single-patient re-use in the home environment and
multipatient re-use in the hospital/institutional environment.

Using your mask

When using your mask with ResMed CPAP or bilevel devices that
have mask setting options, refer to the Technical specifications
section in this user guide for mask selection options.
For a full list of compatible devices for this mask, see the
Mask/Device Compatibility List on www.resmed.com on the
Products page under Service & Support. If you do not have internet
access, please contact your ResMed representative.
Notes:

This mask is not compatible for use with ResMed AutoSet
CS™ 2 and VPAP™ Adapt SV devices.

SmartStart may not operate effectively when using this mask
with some CPAP or bilevel devices that have this feature.
S
YSTEM
English
1