Operation Procedure; Important Safety Instructions - QUALITY LIFTS Q12 Installation, Operation & Maintenance Manual

Two post surface mounted lift
Table of Contents

Advertisement

O
P
PERATION
ROCEDURE
S
N
D
AFETY
OTICES AND
This product is furnished with graphic safety
warning labels, which are reproduced on
page 3 of these instructions. Do not remove
or deface these warning labels, or allow them
to be removed or defaced. For your safety,
and the safety of others, read and understand
all of the safety notices and decals included.
O
/E
R
WNER
MPLOYER
ESPONSIBILITIES
This lift has been designed and constructed according
to ANSI/ALI ALCTV-2011 standard. The standard
applies to lift manufactures, as well as to owners and
employers. The owner/employer's responsibilities as
prescribed by ANSI/ALI ALOIM-2008, are summarized
below. For exact wording refer to the actual standard
provided with this manual in the literature pack.
The Owner/Employer shall insure that lift
operators are qualified and that they are trained
in the safe use and operation of the lift using the
manufacturer's operating instructions; ALI/SM
93 -1, ALI Lifting it Right safety manual; ALI/ST-
90 ALI Safety Tips card; ANSI/ALI ALOIM-2008,
American National Standard for Automotive Lifts-
Safety Requirements for Operation, Inspection
and Maintenance; ALI/WL Series, ALI Uniform
Warning Label Decals/Placards; and in case of
frame engaging lifts, ALI/LP-GUIDE, Vehicle
Lifting Points/Quick Reference Guide for Frame
Engaging Lifts.
The
Owner/Employer
procedures to periodically inspect the lift in
accordance
with
the
instructions or ANSI/ALI ALOIM-2008, American
National Standard for Automotive Lifts-Safety
Requirements for Operation, Inspection and
Maintenance; and the employer shall insure that
the lift inspectors are qualified and that they are
adequately trained in the inspection of the lift.
The
Owner/Employer
procedures to periodically maintain the lift in
accordance
with
the
instructions or ANSI/ALIOIM-2008, American
National Standard for Automotive Lifts-Safety
Requirements for Operation, Inspection and
Maintenance; and the employer shall insure that
the lift maintenance personnel are qualified and
that
they
are
adequately
maintenance of the lift.
The
Owner/Employer
periodic inspection and maintenance records
recommended by the manufacturer or ANSI/ALI
ALOIM-2008, American National Standard for
Automotive
Lifts-Safety
Operation, Inspection and Maintenance.
Model Q12
Installation, Operation and Maintenance
ECALS
shall
establish
lift
manufacturer's
shall
establish
lift
manufacturer's
trained
in
the
shall
maintain
the
Requirements
for
Page 10
The Owner/Employer shall display the lift
manufacturer's operating instructions; ALI/SM
93 -1, ALI Lifting it Right safety manual; ALI/ST-
90 ALI Safety Tips card; ANSI/ALI ALOIM-2008,
American National Standard for Automotive Lifts-
Safety Requirements for Operation, Inspection
and Maintenance; and in the case of frame
engaging lift, ALI/LP-GUIDE, Vehicle Lifting
Points/Quick
Reference
Engaging Lifts; in a conspicuous location in the
lift area convenient to the operator.

IMPORTANT SAFETY INSTRUCTIONS

When using your garage equipment, basic safety
precautions should always be followed, including
the following:
1. Read all instructions.
2. Care must be taken as burns can occur from
touching hot parts.
3. To reduce the risk of fire, do not operate
equipment in the vicinity of open containers
of flammable liquids (gasoline).
4. Keep hair, loose clothing, fingers, and all
parts of body away from moving parts.
5. Use only as described in this manual. Use
only
manufacturer's
attachments.
6. ALWAYS
WEAR
Everyday eyeglasses only have impact
resistant lenses, they are not safety glasses.
SAVE THESE INSTRUCTIONS
Guide
for
Frame
recommended
SAFETY
GLASSES.
Rev. 02/01/15
Q12-IOM-Q.
doc

Advertisement

Table of Contents
loading

Table of Contents