Sanuvox ASEPT.2X Instruction Manual

REGISTER
YOUR WARRANTY
ONLINE AT
www.sanuvox.com
READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS PRODUCT.
Read and follow all instructions contained in
this manual before using the product. Failure
to comply with these instructions may result
in personal injuries or damage to the unit or
system.
1. Installation and servicing of this equipment
can be hazardous due to electrical components.
Only trained and qualified service personnel
such as certified electricians should install,
repair or service equipment.
2. Untrained personnel can perform basic
maintenance functions such as replacing
UVC lamps. All other operations should be
performed by trained service personnel such
as certified electricians.
3. When working on the unit or system, observe
precautions in the literature, tags and labels
attached to the unit or system, and all other
safety precautions considered as best practices
in the industry.
4. When applicable, local
comprise more restrictive installation and/or
certification requirements. The afore mentioned
Installation Date: _______________
Installer Contact Info.: _________________________________________
ASEPT.2X
MOBILE UV STERILIZATION SYSTEM
Medical Model

IMPORTANT SAFETY INSTRUCTIONS

requirements prevail on those of this document
and the installer agrees to conform to these at
his own expense.
5. Follow all the safety instructions outlined in this
document and respect all local and national
codes applicable.
6. Never expose eyes or skin to ultraviolet
light from any source. Never start the
disinfection cycle with someone in the
room: the ASEPT.2X is designed to be used
in unoccupied spaces. Therefore, before
installing or performing maintenance on the
unit or system, TURN OFF AND DISCONNECT
the unit or system from all power sources
(there may be more than one switch to
disconnect).
CAUTION: Electrical shock may cause
personal injuries or possibly death.
7. UV rays may overtime damage or discolour
certain types of polymer or plastic.
8. When installing or performing maintenance on
regulation may the UV unit or system, it is recommended to
wear safety glasses and gloves. In order to
avoid reduced performance of lamp(s), do not
Sanuvox Technologies Inc, © 2021 All rights reserved. October 2021 EN v.2
touch lamp glass without gloves.
9. Just like conventional fluorescent lamps, UV
lamps contain a small quantity of mercury: if a
lamp breaks, clean and dispose of with care.
UV lamps can be disposed/recycled after use in
the same way as any other fluorescent lamps.
Contact and follow your local and national
authorities' specific instructions.
10. Use only specified SANUVOX branded
replacement UV lamps with your unit or
system. Use of any other lamps will void your
warranty and can result in damage to the unit,
system and/or lamp(s).
11. Most UV units or systems are not waterproof.
DO NOT INSTALL OUTDOORS OR IN WET
LOCATION unless specified otherwise.
12. ASEPT.2X units are heavy: to lift an ASPET.2X
unit, make sure there is a minimum of 2 people
at all times, and lift the unit by the handles with
your hands at an equal distance.
Installed by: _________________
Instruction Manual
SAVE THESE INSTRUCTIONS