Advertisement
https://appliancetechmanuals.com
1) Disconnect air supply. Remove guard ring, blade clip and knife and wash after use. Remove two
knurled screws that hold the guard ring in place. It may be necessary to pull down on the guard ring to
remove it if the locating pins are too tight. Support the blade with your hand, lifting slightly to loosen
blade clip so it can be pulled out releasing the blade to drop out. These parts should be sanitized in a
dishwasher.
2) Wash down with soap and water entire splash area around knife, guard ring and lid remover.
3) Entire machine can be washed.
4) Reassemble blade, blade clip and all guarding. Be sure all screws are tight. Reconnect air supply
CAUTION! Keep water out of airlines especially when using pressure washers. Do not allow food to
remain on machine. Dried food deposits are unsanitary and can damage valves, and cylinders.
8/4/2010
Blade Cleaning and Inspection
CLEANING INSTRUCTIONS
Page 3 of 8
M098 – REV B (JULY 2006)
Advertisement
