Demtech Pro-Wedge VM-20 Operator's Manual page 2

Rev. F, December 2020
© Copyright 2020 by DEMTECH Services, Inc.
This manual contains procedures for safety, general unpacking,
set-up, and operation of your DEMTECH Services, Inc. Pro-Wedge VM-20.
The text of this publication, or any part thereof, may not be reproduced or transmitted in any
form or by any means, electronic or mechanical, including photocopying, recording, storage in
an information retrieval system, or otherwise, without prior written permission of DEMTECH
Services, Inc.
Patents have been granted and/or patent applications are pending or are in the process of
preparation on all DEMTECH Services, Inc. developments.
The material in the manual is for informational purposes only and is subject to change without
notice.
DEMTECH Services, Inc. assumes no responsibility for any errors that may appear in this
manual.
Manual Number: 100-OPERATOR'S MANUAL/VM-20/AU, Revision: A
6414 Capitol Avenue Diamond Springs, CA 95619 U.S.A.
Pro-Wedge VM-20 Operator's Manual
All Rights Reserved
Scope of Manual:
Notice
DEMTECH Services, Inc.
Telephone: (530) 621-3200
Toll Free: (888) 324-9353
Fax: (530) 621-0150
www.demtech.com
Web Site:
Page ii