Related Manuals for XPower X-2700
Summary of Contents for XPower X-2700
- Page 1 Air Scrubber Owner's Manual Model: X-2700, X-2800, X-2830 (115 V~, 60Hz) Read and save these instructions before use www.xpower.com | 1-(855)-855-8868 | info@xpower.com Index: NA-1-A38 Edition: 2.1.Final...
-
Page 2: Safety Instructions
• If the appliance is damaged or it malfunctions, continue to use it. Unplug the product from the electrical outlet. Refer to troubleshooting guide or contact XPOWER. • Store in a dry area, away from exposure to sunlight, extreme temperature and humidity, or other extreme environments, when not in use. -
Page 3: Items Included
P-80 Series, P-100 Series, P-200 Series (115V 60HZ) Read and save these instructions before use Lea y guarde estas instrucciones antes de usar la unidad Lire et conserver ces instructions avant utilisation www.xpower.com | 1-(855)-8868 | info@xpower.com Index: NA-1-A2 Edition: 1.0.Alpha Parts Description Machine... - Page 4 The graph only presents the appearance of the filters. The actual sizes of filters with different part number could be slightly different. (See Page 15: Technical Specifications) If your product(s) is not listed above, please visit www.xpower.com for more information. English - 4...
- Page 5 • Air Circulation: It’s suggested to have a constant efficient air circulation inside your working area. You may achieve this with XPOWER Air Mover combinations. • Environment Humidity: For optimal efficiency and higher filter lifespan, the Air Scrubber should not be operated in an environment with a high relative humidity level.
- Page 6 Intake Ducting • Turn off the machine and remove the foam cover*. • Attach the ducting hose to the intake. * For model X-2700 only. Exhaust Ducting • Turn off the machine. • Attach the ducting hose to the exhaust.
- Page 7 Control Panel Timer Value / Running Time Value Display Fan Speed Timer Value /Running Power Time Value Switch Switch Timer Speed TIMER Control RUNNING TIME OFF-TIMER FILTER CHANGE SPEED Control Value Display Filter Change Indicator Indicator Light Buttons Power Switch Speed Control Press to switch on / off the machine.
- Page 8 Timer Value / Timer Value / Running Time Value Running Time Value Display Display Fan Speed Fan Speed Control Panel (Continued) Timer Value Timer Value /Running /Running Power Indicators Time Value Time Value Switch Switch Switch Running Time Value Timer Value Timer Value / Timer Timer...
- Page 9 Unhealthy, or Very Unhealthy, or Hazardous Foam Cover* • Before use, please take off the foam cover. Otherwise it will cause abnormal motor operation and failure. • After use, please put back the Foam Cover foam cover. * For model X-2700 only. English - 9...
-
Page 10: User Maintenance Instructions
• Check if the grille covers are clean. Remove dirt or any other objects that could block the air inlet and air outlet. • Do not stack more than five units of this appliance. * For model X-2700 only. English - 10... - Page 11 Machine Maintenance (Continued) Organize the Cord • Wrap the power cord around the intake for storage after use.* • Use convenient clip at end of cord to secure in place. * Wrap-around design does not apply to all models mentioned in this manual. Filter Maintenance To ensure the best filtration efficiency and to prevent secondary pollution of used filters, you should replace or clean the filters frequently or when the filter change light...
- Page 12 Filter Maintenance (Continued) Clean the filters (See Also Page 4: Filters) • Filters: These filters are washable with water. Use a vacuum or clean Nylon Mesh cloth to remove loose debris. And then further clean the filter with water. Use a cloth to remove the water on the filter and dry it naturally in the air.
- Page 13 Filter Maintenance (Continued) Reload the filters To ensure the best efficiency and lifespan, each filter must be reloaded in a correct position, sequence and orientation. Inner Filters Inner Filters • Other filters must be loaded inside the Air Scrubber. See Page 4: Filters •...
- Page 14 Filter Maintenance (Continued) Tips: • On one of the side of each filter, there is a label with an arrow showing the airflow direction. • When placing the filter, the side with label should face up. The arrow on the label should point to the blue housing.
-
Page 15: Troubleshooting Guide
Filters are fully loaded. The Clean or replace the loaded movement filter change light illuminates. filters. (See Page 10: Filter Maintenance) If troubleshooting does not resolve your problem, please contact XPOWER or other parties authorized by XPOWER for further instructions. English - 15... -
Page 16: Technical Specification
Technical Specification Machine Specification MODEL NUMBER X-2700 X-2800 X-2830 Voltage/ 115 V~, 60 Hz Frequency Amperage 2.8 A Motor Power 1/2 HP Rated Airflow 550 CFM Speed Control 5 Speeds Off-Timer Meter 0.5 - 24 h Cord Length 13 ft. / 4 m Unit Dimension 16.6 x 10.4 x 18.9 in.
Need help?
Do you have a question about the X-2700 and is the answer not in the manual?
Questions and answers