Mounting (Optional) - Tripp Lite PowerVerter PV1000HF Owner's Manual

Mounting (optional)

WARNING! If you choose to mount your Inverter, mount it and wire its DC input BEFORE DC battery
connection. Failure to follow these instructions may lead to personal injury and/or damage to the
Inverter and connected systems.
Tripp Lite Inverters are designed for horizontal mounting in a variety of vehicular or non-vehicular applications. User must
supply mounting hardware and is responsible for determining if the hardware and mounting surface are suitable to support
the weight of the Inverter. Contact Tripp Lite if you require further assistance in mounting your Inverter.
Vehicular and Non-Vehicular
Horizontal Mount
Install and tighten four user-supplied fasteners through
Inverter mounting slots and into a rigid horizontal surface.
Install fasteners as far back in the mounting slots as
possible, otherwise the Inverter may slide back and forth
if fasteners loosen.
8