Living Spaces Halle C/E King Assembly Instructions

Halle C/E King Assembly Instructions
Hardware included in headboard carton to attach bed feet and center support system.
A C D
Φ6*20 MM Φ8*50 MM Φ6 MM
8PCS 12PCS 16PCS
1
Step#1
Retrieve bed feet from carton fastened behind the headboard.
Attach bed feet (F) to the headboard using Wrench (I), Bolt (C) and Washer (E).
Step#2
Attach bed feet (F1) to the footboard using Wrench (I), Bolt (C) and Washer (E).
Step#3
Attach steel center support legs (J) to the Metal slat (G) using Wrench (I), Bolt (T) and
Washer (D).
CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
E F F
Φ8 MM H=5 CM H=5 CM
14PCS 2PCS 2PCS
2
G I
Metal Slats Φ8 MM Center support legs
H=11CM
4PCS 1PC
J K
Φ8*80MM Φ6*25MM
8PCS 2PCS 8PCS
3
T