Parts List All electronics and components that need to be installed are located in bags under the foundation or attached to the frame. Before discarding the packing materials, ensure that all the parts are accounted for. PARTS LIST CODE DESCRIPTION Left Back Cushion Middle Back Cushion Right Back Cushion...
Installat ion Guide One person is required to set up the foundation. It takes about 5 minutes. Detach the transformer and power cord from the back rail of the mech under the seat. Slide inside back receivers onto the steel mechanism posts in the base of the recliner. Press both sides of the back firmly into place until the back automatically locks into track.
Page 6
Installat ion Guide Slide the metal inserts on the chair’s wings into the metal sleeves on the side of the recliner back. Metal Inserts Metal Sleeves Flip the back flap up and connect all the cables accordingly. Fasten the back flap to the bottom of the furniture. Multi Media(White) Headrest(yellow) Side Switch...
Page 7
Installat ion Guide Connect the power transformer to the socket at the bottom of the back of the recliner. Connect the Power Cord into the Power Transformer. Plug the power cord into a nearby outlet, still making sure it is clear of the metal base. Power Transformer Power...
Func�on introduc�ons Caution: Read the important instructions below before operating your power mechanized equipment Do not allow children to play on or operate this power mechanized equipment Side Control How to Use Touch-Sensitive LED Lights Touch the Middle of LED Lights to activate the LED Light. Touch the Middle of LED Lights again to activate the stronger LED Light.
Opera�ng Instruc�ons SIDE CONTROL CLOSE & HOME LUMBAR HEADREST FOOTREST Front of Arm Type-C OPEN CLOSE OPEN CLOSE OPEN To recline: Sit on the furniture, and press the front of the button closest to the footrest to smoothly raise the footrest and recline to any position.
Page 10
Opera�ng Instruc�ons Multi Media Control Panel Light Volume Treble Bass Vibration Adjust the Volume Wireless Connection Adjust the Treble Headset Adjust the Bass Adjust the Intensity of Vibration Turning On/Off the Speaker Press and hold the volume adjustment knob to turn on the speaker. Press and hold again to turn off the speaker. Wireless Connection Pairing Mode Press and hold the wireless button (blue light flashes) to initiate pairing.
Page 11
Opera�ng Instruc�ons Multi Media Control Panel Notes 1. Wireless connection search will automatically end after three minutes without connecting to any devices, and the flashing light will turn off. If you press the button during the flashing period, the search will end. 2.
Page 12
Opera�ng Instruc�ons Control HEAT BUTTON Press the heat button to activate the heat function. Press again to cycle intensity through low, medium, and high heat. AIR MASSAGE BUTTON Press the air massage button to activate the massage function. Press again to cycle through low, medium, and high intensity.
Disassembly Instruc�ons Unzip the seat cushion and back cushion, to remove the back from the base. Pull out the black tab by hand or use a screwdriver pressing outward on black tab, then lift the back from the recliner of the chair to release. Screwdriver required (not included) UNZIP...
Audio System PAIRING INSTRUCTION Before you start. Switch on the pairing function on your mobile device. Make sure your power foundation is correctly connected and is power-on. 1. Pair with Audio System: Search for the audio device named “Moto Audio” on your device and establish a connection. 2.
Page 16
Thank you for purchasing a Power Founda�on. Contact Customer Service Toll Free at 1-844-696-6886 Email: motoservice@hhcusacorp.com...
Need help?
Do you have a question about the 352256 and is the answer not in the manual?
Questions and answers