5. MAINTENANCE PROCEDURES
ACTION
CLEAN
Upholstery
Guide Rods
Shields
Hand Grips
INSPECT
Cable
Hardware
Frame
Hand Grips
LUBRICATE
Guide Rods
CLEAN
•
Upholstery with a mild soap and water.
•
Guide rods with a cotton cloth and break-free.
•
Hand grips with mild soap and water.
INSPECT
•
Cables for wear or damage and proper tension (should not exceed ¾" deflection). Pay
close attention at bends and attachments points.
•
Hardware should be checked for looseness. Tighten as required using metric tools.
•
Frames should be inspected for wear or damage.
•
Handgrips should be checked for wear or damage.
LUBRICATE
•
Guide rods with Silicone Compound (part number 3238401). Apply the lubricant to a
cotton cloth, then run the cotton cloth up and down the guide rods as needed.
DAILY
MONTHLY BI-ANNUALLY YEARLY
X
X
X
X
NEEDED
X
AS
X
X
X
X
5-1