Vhf Wireless Microphone - soundsation GO-SOUND Air User Manual

ENGLISH

5.6. VHF WIRELESS MICROPHONE

These portable PA systems feature a handheld wireless microphones. Below there are
all details.
1
OFF
2
3
4
18
1) Grill
It protects the microphone capsule. Do not remove this cap to
prevent damage to internal components.
2) Led
This LED lights up briefly when you turn on the microphone.
Under normal operating conditions (switch 2 in MUTE or ON
position) and batteries in normal conditions, this LED does not
light. It flashes when batteries charge level is low and they must
be replaced.
3) On/Off Switch
It has 3 positions: when it's all down, transmitter is OFF. When it
is in central position (MUTE), the transmitter is on but audio is
disabled; finally, when it's all up (ON), the transmitter is working
and the audio is active
NOTE: Standby central position allows the unit to trans-
mit without audio. This option is important to prevent
interference in the receiver due to the absence of a
radio transmitting signal. It is, therefore, suggested
to ALWAYS use this MUTE position when you tempo-
rarily don't sing or play but the wireless microphone
is connected to an audio system (e.g. during a pause
in a gig). You can move the switch to OFF position (all
down) only when you are sure that the sound system
volume is low.
4) Battery Slot
Batteries are housed inside the transmitter. Use 2x 1.5V AA type
batteries (not included), paying attention to their polarity.
GO-SOUND 8-10Air User manual