Adding Detergent And Care Product; Starting The Programme; Soaking Laundry; Adding Laundry - Bosch WAV28KH1BY User Manual And Installation Instructions

Hide thumbs Also See for WAV28KH1BY:
Table of Contents

Advertisement

13.5 Adding detergent and
care product
For programmes in which intelligent
dosing is not possible or desirable,
you can add detergent manually.
Tip: In addition to intelligent dosing,
you can also add additional care
product for laundry, e.g. stain re-
mover, starch or bleach, to the
manual dosing compartment. Do not
add any additional detergent to the
manual dosing compartment to avoid
overdosage and/or foaming.
Note: Observe the information about
detergents and care products
→ Page 29.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 18
If required, add the care product.
3.
Push in the detergent drawer.
4.
13.6 Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press
⁠   Start / Reload.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: 0.
13.7 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press
Reload.
To resume the programme, after
3.
the desired soaking time, press
⁠   Start / Reload.
13.8 Adding laundry
Press
⁠   Start / Reload.
1.
The appliance pauses.
⁠ appears, it is not pos-
Note: If
sible to add laundry.
When
⁠ goes out, it is possible to
add laundry.
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press
⁠   Start / Reload.
5.
13.9 Cancelling the pro-
gramme
Press
⁠   Start / Reload.
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse 
– If the water level is high, start
the
⁠   Spin programme or select
a suitable programme for drain-
ing.
→ "Programmes", Page 25
Remove the laundry → Page 32.
3.
operation en
⁠   Start /
programme.
31

Advertisement

Table of Contents
loading

Table of Contents