Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WAV28K0MSN
Summary of Contents for Bosch WAV28K0MSN
- Page 1 Washing machine WAV28K0MSN [en] User manual and installation instructions...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 7 Display ........ 20 1.1 General information.... 4 8 Buttons ........ 22 1.2 Intended use....... 4 1.3 Restriction on user group... 4 9 Programmes ....... 24 1.4 Safe installation ...... 5 10 Accessories...... - Page 3 15 Intelligent dosing system .. 32 15.1 Starting the programme with intelligent dosing sys- tem ......... 32 15.2 Filling the dispensers ..... 33 15.3 Dispenser contents .... 33 15.4 Basic dosage ...... 34 16 Basic settings...... 35 16.1 Overview of basic settings .. 35 16.2 Changing the basic set- tings........ 36 17 Cleaning and servicing ....
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. - Page 6 en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
-
Page 7: Safe Use
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en 1.6 Safe cleaning and maintenance Take note of the safety instructions when cleaning and performing maintenance work on the appliance. WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. -
Page 10: Preventing Material Damage
en Preventing material damage Make sure that the valve housing ▶ 2 Preventing material for the water inlet hose does not come into contact with its sur- damage roundings and is not subjected to any external forces. Follow these instructions to avoid ma- Ensure that the inner diameter of terial damage and damage to the ap- ▶... -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Do not use cleaning products with detergent based on the laundry's de- ▶ a high alcohol content. gree of soiling. Do not use hard scouring pads or ▶ a For light to normal soiling, a smal- cleaning sponges. -
Page 12: Energy Saving Mode
en Installation and connection Close the appliance door. The appliance comes with an Aqua- Sensor. 4.2 Contents of package a During the rinse cycle, the Aqua- Sensor checks the degree of tur- After unpacking all parts, check for bidity of the rinsing water, and ad- any damage in transit and complete- justs the duration and number of ness of the delivery. - Page 13 Installation and connection en Installation loca- Requirements WARNING tion Risk of injury! When using the appliance on a base, Kitchen unit Only install the the appliance may tip over. appliance under- Always secure the feet of the appli- neath a continu- ▶...
-
Page 14: Connecting The Appliance
en Installation and connection Unscrew and remove Put on the 4 cover caps. screws for the 4 transit bolts with a WAF 13 wrench. Press down on the 4 cover caps. Remove the power cable from the holder. 4.5 Connecting the appliance Connecting the water inlet hose Remove the 4 sleeves. -
Page 15: Aligning The Appliance
Installation and connection en Connect the water inlet hose to a Plastic pipe with Fix and secure tap (26.4 mm = 3/4"). rubber sleeve or the water outlet gully hose with an el- bow. 4.6 Aligning the appliance In order to reduce noise and vibra- tion and to prevent the appliance from moving, align the appliance cor- Open the water tap carefully and... -
Page 16: Connecting The Appliance To The Electricity Supply
en Installation and connection Screw the lock nuts tightly against the housing using a WAF 17 wrench. In doing so, hold the foot tight and do not adjust its height. 4.7 Connecting the appliance to the electricity supply Note: Your electrical domestic install- ation for this appliance must comply with the local legal provisions and safety regulations, and should in-... -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Maintenance flap for the drain Water inlet hose → Page 14 pump → Page 38 Door... -
Page 18: Control Panel
en Familiarising yourself with your appliance Manual dosing compartment : Dispenser for fabric softener or liquid detergent : Dispenser for liquid deter- gent 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 24 Programme selector → Page 29... -
Page 19: Before Using For The First Time
first time en Start the first wash cycle or press first time 6 Before using for the to switch off the appliance. → "Basic operation", Page 29 first time Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. -
Page 20: Display
en Display 7 Display The display shows the current settings, options or relevant information. Display Designation More information 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. "Ready in" time → "Buttons", Page 22 Recommended The maximum load capacity for the selec- load ted programme in kg. - Page 21 Display en Display Designation More information Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 31 Energy consump- Energy consumption for the selected pro- tion gramme.
-
Page 22: Buttons
en Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Button Selection More information (Start/Reload/ ¡ Start Start, cancel or pause the pro- Pause) gramme. ¡ Cancel ¡ Pause ¡ Activate Activate or deactivate a shorter pro- (SpeedPerfect) gramme duration. - Page 23 Buttons en Button Selection More information - 1400 Adjust the spin speed or activate (Spin Speed Re- (Rinse Hold). duction) Set spin speed in rpm. is selected, the water is not drained at the end of the washing cycle and the spin cycle is deactiv- ated.
-
Page 24: Programmes
en Programmes 9 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Cotton Wash hard-wearing items made from cotton, linen or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate Programme setting: ¡... - Page 25 Programmes en Programme Description Max. load (kg) ¡ Max. 1400 rpm Delicate/Silk Wash delicate, washable items made from silk, vis- cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag. Programme setting: ¡...
- Page 26 en Programmes Programme Description Max. load (kg) Shirts/Blouses Wash non-iron shirts and blouses made from cot- ton, linen, or synthetic or blended fabrics. Tip: In order to avoid creasing in your laundry, you can activate . The laundry is only given a short spin and can be removed while still dripping wet.
-
Page 27: Laundry
Programmes en Programme Description Max. load (kg) Use washing powder or a detergent that contains bleach. Halve the amount of detergent to avoid foaming. Do not use fabric softener. Do not use liquid detergent or detergent that is in- tended for woollens or delicates. Note: The drum cleaning indicator will flash to re- mind you if you have not used a programme at 60 °C or higher for a long time. -
Page 28: Preparing The Laundry
QR code in the table of bag. contents or on www.bosch- home.com. – Tie together longer drawstrings, and tie cords with solid end- 11.1 Preparing the laundry pieces in hoods or trousers –... -
Page 29: Detergents And Care
¡ You can find further information in ance the digital instruction manual by Requirement: The appliance has scanning the QR code in the table been correctly installed and connec- of contents or on www.bosch- ted. home.com. → "Installation and connection", ¡ Observe the information on safety Page 12 → Page 4 and preventing material... -
Page 30: Loading Laundry
en operation Notes 13.6 Starting the programme ¡ The programme settings are not Requirement: A programme is set. saved permanently for the pro- → "Setting a programme", Page 29 gramme. ¡ The setting is saved if you activate Press ▶ or deactivate the intelligent dosing a The drum rotates and load detec- system. -
Page 31: Cancelling The Programme
Childproof lock en Wipe the rubber gasket dry and re- 13.9 Cancelling the pro- move any foreign objects. gramme Press Open the appliance door. The appliance door remains locked for safety reasons if the temperature and water levels are high. – If the temperature is high, start the Rinse programme. -
Page 32: Intelligent Dosing System
en Intelligent dosing system So that the programme currently ¡ Activate the intelligent dosing sys- running is not cancelled, the pro- tem once the programme has gramme selector must be set to ended. the initial programme. → "Buttons", Page 22 goes out in the display. Requirements ¡... -
Page 33: Filling The Dispensers
Intelligent dosing system en Pour liquid detergent and fabric 15.2 Filling the dispensers softener into the relevant dis- If you want to use the intelligent dos- pensers. ing system or if the appliance dis- → "Detergent drawer", Page 17 plays a notification during operation of the appliance, fill the dispensers. -
Page 34: Basic Dosage
en Intelligent dosing system To set , press i-DOS. a The display shows To set , press i-DOS again. To end the setting process, wait briefly. 15.4 Basic dosage The basic dosage depends on the manufacturer's instructions for the de- tergent, the water hardness and the degree of soiling of the laundry. -
Page 35: Basic Settings
Basic settings en 16 Basic settings You can configure the basic settings for your appliance to meet your needs. 16.1 Overview of basic settings Basic setting Programme posi- Value Description tion End signal 0 (off) Set the volume of 1 (quiet) the signal at the 2 (medium) end of the pro- 3 (loud) -
Page 36: Changing The Basic Set- Tings
▶ in the digital instruction manual by on the rear against water, deter- scanning the QR code in the table of gent and fabric softener residue. contents or on www.bosch- Switch off the appliance. home.com. → "Switching off the appliance", Page 31... - Page 37 Cleaning and servicing en Press down on the insert and re- Empty the detergent drawer. move the detergent drawer. Clean the pump unit with a damp Remove the pump unit. cloth. Unclip the detergent drawer cover Clean the detergent drawer and and remove it.
-
Page 38: Cleaning The Drain Pump
en Cleaning and servicing Disconnect the appliance's mains plug from the power supply. Open and remove the service flap. Slide a sufficiently large container under the opening. Clean the housing of the detergent drawer in the appliance. Take the drain hose out of the holder. - Page 39 Cleaning and servicing en Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 38 hot. Since water may remain in the Do not touch the hot detergent ▶...
-
Page 40: Cleaning The Intake Opening In The Rubber Gasket
en Cleaning and servicing Ensure that both impellers can Insert and close the service flap. turn. 17.4 Cleaning the intake Insert the pump cap. opening in the rubber Ensure that the parts of the ‒ pump cap are correctly as- gasket sembled. Regularly check the intake opening in the rubber gasket for any block- ages and clean the intake opening. -
Page 41: Troubleshooting
Troubleshooting en 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 42 en Troubleshooting Fault Cause and troubleshooting "E:30 / -80" Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water ▶ hose. → "Connecting the appliance", Page 14 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
- Page 43 Troubleshooting en Fault Cause and troubleshooting "E:30 / -10" and/or The tap is turned off. Turn on the tap. ▶ The water inlet hose is kinked or jammed. Ensure that the water inlet hose is not kinked or ▶ jammed. Water level measurement system is defective. Note: With the error message, the appliance starts a draining process.
- Page 44 en Troubleshooting Fault Cause and troubleshooting Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into the compartment for manual dosing (not for outdoor clothing, sportswear or items stuffed with down).
- Page 45 Troubleshooting en Fault Cause and troubleshooting The appliance is not There has been a power cut. working. Check whether the lighting in your kitchen or other ▶ appliances are working. The programme does You have not pressed not start. Press ▶ Door is not closed.
- Page 46 en Troubleshooting Fault Cause and troubleshooting The door cannot The temperature is too high. be opened. Wait until the temperature has dropped. ▶ → "Cancelling the programme", Page 31 ▶ Water level is too high. Select a suitable programme for draining. ▶ → "Programmes", Page 24 Power failure.
- Page 47 Troubleshooting en Fault Cause and troubleshooting The water is not drain- Remove any unapproved extensions from the water ▶ ing. hose. → "Connecting the appliance", Page 14 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
- Page 48 en Troubleshooting Fault Cause and troubleshooting Drum jerks after the This is caused by an internal motor test. programme starts. Not a fault – no action required. ▶ Vibrations and move- Appliance is not correctly aligned. ment of the appliance → "Aligning the appliance", Page 15 ▶...
- Page 49 Troubleshooting en Fault Cause and troubleshooting High spin speed not Note: Where possible, mix large and small items in reached. the drum. Different sized items of laundry distribute themselves better during the spin cycle. Start the Spin programme. ▶ The spin programme Drain pipe or water outlet hose is blocked.
- Page 50 en Troubleshooting Fault Cause and troubleshooting Creasing. The spin speed is too high. The next time you run a wash cycle, set a lower ▶ spin speed. The load is too large. The next time you run a wash cycle, reduce the ▶...
- Page 51 Troubleshooting en Fault Cause and troubleshooting Detergent residue on Unsuitable detergent added to the dispenser of the in- the damp washing. telligent dosing system. Check whether the detergent used is suitable. → "Detergents and care products", Page 29 Drain the dispenser. → "Cleaning the detergent drawer", Page 36 Clean the dispenser.
- Page 52 en Troubleshooting Fault Cause and troubleshooting Insufficient cleaning. Check whether the detergent used is suitable. → "Detergents and care products", Page 29 Drain the dispenser. → "Cleaning the detergent drawer", Page 36 Clean the dispenser. Refill the dispenser. → "Filling the dispensers", Page 33 Water is leaking out at Water inlet hose is not correctly/securely connected.
-
Page 53: Emergency Release
→ "Installation and connection", in the digital instruction manual by Page 12 and scanning the QR code in the table of → "Starting an empty washing contents or on www.bosch- home.com. cycle", Page 19. Turn off the tap. Empty the water inlet hose. Switch off the appliance. -
Page 54: Disposing Of Old Appliance
en Customer Service 19.4 Disposing of old appli- 20 Customer Service ance Function-relevant genuine spare parts Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health! -
Page 55: Aqua-Stop Guarantee
Customer Service en 20.2 AQUA-STOP guarantee In addition to warranty claims against the seller under the purchase agree- ment and in addition to our manufac- turer's warranty, we offer compensa- tion under the following conditions. ¡ If our Aqua-Stop system is defect- ive and causes water damage, we will make good the damage for private users. - Page 56 en Consumption values 21 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the Eco 40-60 are indic- ative only and were determined in accordance with the applicable standard EN60456. The automatic dosing function has been deactivated for this pur- pose.
-
Page 57: Technical Data
Technical data en Weight 69,9 kg Maximum load 9,0 kg Mains voltage 220-240 V, 50-60 Hz Minimum in- stallation protec- tion Nominal power 2300 W Power consump- ¡ Off mode: tion 0,10 W ¡ Left-on mode: 0,50 W Water pressure ¡ Minimum: 100 kPa (1 bar) ¡ Maximum: 1000 kPa (10 bar) Length of the wa- 150 cm... - Page 60 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.