External Equipment Connections; Vcr Setup; Cable Tv Setup - LG MU-60PZ95V Owner's Manual

External Equipment Connections

External Equipment Connections
NOTE: All cables shown are not included with the

VCR Setup

VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor
- Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time.
Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may
remain visible on the screen.
Connection Option 1
Set VCR output switch to 3 or 4 and then tune
Monitor to the same channel number.
Connection Option 2
1. Connect the audio and video cables from the
VCR's output jacks to the Monitor input jacks,
as shown in the figure.
When connecting the Monitor to VCR, match
the jack colors (Video = yellow, Audio Left =
white, and Audio Right = red).
If you connect an S-VIDEO output from VCR to
the S-VIDEO input, the picture quality is
improved; compared to connecting a regular
VCR to the Video input.
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner's
manual.)
3. Select the input source with using the INPUT
SELECT button on the remote control. (If con-
nected to A/V INPUT 1, select Video input
source)
Do not connect to both Video and S-
Video at the same time. In the event
that you connect both Video and the
S-Video cables, only the S-Video will
work.)
Cable Cable TV Setup TV Setup
- After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming.
The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV.
- For further information regarding cable TV service, contact your local cable TV service provider(s).
Connection Option 1
1. Select 3 or 4 with channel switch on cable box.
2. Tune the TV channel to the same selected output channel on
cable box.
3. Select channels at the cable box or with the cable box remote
control.
Connection Option 2
1. Connect the audio and video cables from the Cable Box's
output jacks to the TV input jacks, as shown in the figure.
When connecting the TV to a Cable Box, match the jack col-
ors (Video = yellow, Audio Left = white, and Audio Right =
red).
2. Select the input source with using the INPUT SELECT button
on the remote control. (If connected to A/V INPUT 1, select
Video input source)
3. Select your desired channel with the remote control for cable
box.
Monitor
COMPONENT INPUT 2
Y P P
B R
COMPONENT INPUT 1
RGB INPUT RGB OUTPUT
S-VIDEO
OUT
(R) AUDIO (L) VIDEO
IN
COMPONENT INPUT 2
Y
COMPONENT INPUT 1
TPUT
( ) ( )
R
R L R L/MONO
A/V INPUT EXTERNAL SPEAKER
VCR
P P
B R R L R
L/MONO
A/V INPUT
(R) AUDIO (L) VIDEO
TV
VCR
RF
Cable Box
Installation
( ) ( )
L
AC INPUT
( ) ( ) ( ) ( )
R L
EXTERNAL SPEAKER
AC INPUT
Cable
Owner's Manual 11