External Equipment Connections; Vcr Setup - LG 42PM4M Owner's Manual

Installation

External Equipment Connections

External Equipment Connections
NOTE: Not all cables shown are included with the plasma display.

VCR Setup

VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the VCR and monitor.
- Use the ISM Method (on the Special menu) feature to avoid having a fixed image remain on the screen for a long period of
time. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen
may remain visible on the screen.
Connection Option
1. Connect the audio and video cables from the VCR's output
jacks to the set input jacks, as shown in the figure.
When connecting the set to VCR, match the jack colors
(Video = yellow, Audio Left = white, and Audio Right = red).
If you connect an S-VIDEO output from VCR to the S-VIDEO
input, the picture quality is improved; compared to connect-
ing a regular VCR to the Video input.
2. Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner's manual.)
3. Select the input source with using the INPUT button on the
remote control.
Do not connect to both Video and S-
Video at the same time. In the event
that you connect both Video and the
S-Video cables, only the S-Video will
work.
12 Plasma Monitor
NENT IN
AV IN
L-AUDIO-R
VIDEO
L-AUDIO-R
1
AV
2
OUT
ANT OUT OUTPUT
SWITCH
ANT IN S-VIDEO VIDEO L
VCR
ENT IN
AV IN
L-AUDIO-R
VIDEO
L-AUDIO-R
1
AV
2
OUT
L
EXTERNAL SPEAK
S-VIDEO
R
R
EXTERNAL SPEAKER
S-VIDEO
R L
ANT OUT OUTPUT
SWITCH
R VIDEO S-VIDEO ANT IN
VCR