Installation
Attaching the
TV assembly to the wall
Attaching the
TV assembly to the wall
- Secure the TV assembly by attaching it to a wall for additional support.
External Equipment Connections
External Equipment Connections
Antenna Connection
Antenna Connection
- Antenna or Cable Service without a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
wall antenna
socket
VHF antenna
UHF antenna
outdoor
antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Antenna
10 Plasma TV
• Install the TV brackets on the TV as shown.
Insert the 2 bolts and tighten securely, in the upper holes
on the bracket.
Install the wall brackets on the wall with 4 bolts*, (not
supplied with the product), as shown.
Match the height of the TV brackets and the wall brack-
ets.
Check to be sure the brackets are tightened securely.
• Secure the TV assembly to the wall with strong strings
or wound wire cables, (not supplied with the product), as
shown.
Bronze Wire
RF coaxial wire (75 ohm)
Turn clockwise to tighten.
• In a poor signal area to improve picture quality, purchase
and install a signal amplifier.
• If the antenna needs to be split for two TV's, install a "2-Way
Signal Splitter" in the connections.
• If the antenna is not installed properly, contact your dealer
for assistance.
Signal
Amplifier
MONITOR
OUTPUT
A/V
INPUT 1
S-VIDEO
R
L/MONO
AUDIO
VIDEO
Bronze Wire
Be careful not to bend the bronze wire when
connecting the antenna.
Antenna