Advertisement
PROCEDURE FOR DISASSEMBLY AND REASSEMBLY
〈INDOOR UNIT〉 MODEL RAS-10JH1, RAS-14JH1
1. Front Panel, Air Purifying Unit
(1) Hold both sides of the front panel and lift up.
Front panel
(2) When the front panel is fully opened with both hands,
push the right arm to the inside to release it, and while
closing the front panel slightly, put it out forward.
Front panel
(3) Pull out the pre-filters on the right and left.
Pre-filter
(4) Remove the air purifying unit (2 pieces) by pulling out
while pushing up with both hands.
Remove the air purifying unit
Arm
Pull out
Pull out
Pull out
Push and lift
Push and lift
Push and lift
2. Top Grill, Front Cover
(1) Lift up while pressing the top grill and remove from tab. (3
places: left, center and right)
Remove from tab
(2) Pull forward.
(3) Remove the front panel, pre-filter, air purifying unit, top
grill and exhaust pre-filter.
(4) Remove the screw cover at the bottom of the front cover
and remove the screw.
Screw
Screw cover
(5) Remove the center tab of the front cover (1 place).
Remove the center tab
(6) Place your hands on both sides of the front cover and
remove while pulling in the direction of the arrow.
- 102 -
Screw
(Rear of Exhaust
Screw cover
Pre-filter)
Advertisement
