Display; Function Button; Settings Menu - Rotel C8 Owner's Manual

12
TREBLE: -10 ~ +10.Default: 0.
BALANCE: L10 ~ R10.Default: 0.

Display

3
The front panel display shows the source selected, volume level and tone
settings. The display provides access to the setup and configuration menu
options of the unit and can be dimmed using the setup menu.

Function Button

4
Navigating and ENTER Buttons: Use the navigation / / /
the ENTER on the remote control to access the various menus and operate
the unit settings.
MENU Button: The MENU button activates the setup screen on the front
display. Push the MENU button again to exit setup menu and go back to
normal display.
BACK Button: Pressing briefly returns to the previous selection screen.

Settings Menu

You can access the SETUP menu from the front panel by pressing the MENU
4
button. You can change the value of the selected option by pressing
‹ › 4
the / arrow buttons on the front panel. Step through the sub-menus
4
by pressing the ENTER button on the front panel.
• INPUT SOUCE: Configure the source to the INPUT A, B, C and D.
Valid settings include: AUTO (Default), ANALOG, DIGITAL.
NOTE: When both analog and digital source are connected to the unit,
the unit will select the digital source as a priority if there is a clocking
signal or audio if set to AUTO.
• ZONE SOURCE: Configure the source input for Zone 1 - 4 as fixed or
Matrix-ed from all available source inputs.
Valid settings include: MATRIX (Default), INPUT A, INPUT B, INPUT C, INPUT D.
NOTE: When set to MATRIX the front panel ZONE 1 - 4 buttons
allow section of the source input A - D.
• INPUT NAME: The name of the sources A - D can be customized. For
example INPUT A can be named "MUSIC" for easier reference. Press
the ENTER button to enter the source name edit sub menu as below. The
maximum source name is limited to 10 characters.
Name:
-0123456789ABCD
EFGHIJKLMNOPQRST
UVWXYZ DEL DONE
• ZONE NAME: The name of the Zones 1-4 can be customized. For example
ZONE 1 can be named "AUDIO" for easier reference. Press the ENTER
button to enter the source name edit sub menu as below. The maximum
source name is limited to 6 characters.
›
buttons and
2
C8 / C8+ Eight Channel Power Amplifiers