RB-951 MkII Stereo Power Amplifier 1: Controls, Connections, & Internal Jumpers POWER AMPLIFIER RB-951 MkII POWER BRIDGED MONO CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS: RISQUE DE CHOC ELECTRIQUE–NE PAS OUVRIR WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL...
SPEAKERS AC BREAKER CHANNEL 2 CHANNEL 1 INPUT WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL POWER AMPLIFIER MODEL NO. RB-951 MkII SHOCK, DO NOT EXPOSE POWER CONSUMPTION: 200W THIS EQUIPMENT TO RAIN OR MOISTURE. RB-951 MkII BRIDGED NORMAL...
RB-951 MkII Stereo Power Amplifier 3: Hookup (Bridged Mono mode) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS: RISQUE DE CHOC ELECTRIQUE–NE PAS OUVRIR WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Page 5
Keep the component away from radiators, heat registers, stoves, or any other appliance that produces heat. The unit must be connected to a power supply only of the type and voltage specified on the rear panel of the unit. Connect the component to the power outlet only with the sup- plied power supply cable or an exact equivalent.
Their comments keep the company true to its goal – the pursuit of equipment that is musi- cal, reliable and affordable. All of us at Rotel thank you for buying this product and hope it will bring you many hours of enjoyment.
Please contact your authorized Rotel dealer for an- swers to any questions you might have. In ad- dition, all of us at Rotel welcome your ques- tions and comments. Save the RB-951 shipping carton and all MkII enclosed packing material for future use.
RB-951 MkII Stereo Power Amplifier 12V Trigger Input A pair of screw terminals for connecting the wires carrying a +12 volt trigger signal to turn the amplifier on and off, such as might be used in an elaborate custom installation. To use this feature the adjacent slide switch must be placed to the left position (see previous section).
For best performance, you may want to consider spe- cial high-quality speaker cables. Your autho- rized Rotel dealer can help in the selection of appropriate cables for your system. Polarity and Phasing The polarity – the positive/negative orienta- tion of the connections –...
RB-951 MkII Stereo Power Amplifier Internal Jumper Settings for Custom Installation (see figure 1) There are internal jumpers that can be used to disable the front panel level controls, to select one of two input sensitivity settings, and to engage the special Parallel Mono mode for driving low impedance speaker combinations in custom installations.
200 Watts Dimensions (W x H x D) 440 x 92 x 334 mm x 13 Weight (net) 6.8 kg, 15 lb. All specifications are accurate at the time of printing. Rotel reserves the right to make improvements without notice.
Page 12
The Rotel Co. Ltd. 10-10 Shinsen-Cho Shibuya-Ku Tokyo 150-0045 Japan Phone: +81 3-5458-5325 Fax: +81 3-5458-5310 Rotel of America 54 Concord Street North Reading, MA 01864-2699 Phone: +1 978-664-3820 Fax: +1 978-664-4109 Rotel Europe Meadow Road Worthing, West Sussex BN11 2RX...