Huawei SUN600-5KTL-L0 User Manual page 68

SUN600-(5KTL, 6KTL)-L0
User Manual
You can manually clear the alarm as follows:
●
●
Figure 7-9 Clearing alarms
Issue 02 (2022-03-10)
Method 1: FusionSolar App
Log in to the FusionSolar app and choose My > Device Commissioning. On
the Device Commissioning screen, connect and log in to the Inverter that
generates the AFCI alarm, tap Alarm management, and tap Clear on the
right of the DC arc fault alarm to clear the alarm.
Figure 7-8 Alarm management
Method 2: FusionSolar Smart PV Management System
Log in to the FusionSolar Smart PV Management System using a non-owner
account, choose Management > Alarm Management, select the DC arc
fault alarm, and click Clear to clear the alarm.
Switch to the owner account with PV plant management rights. On the home
page, click the PV plant name to go to the PV plant page, and click OK as
prompted to clear the alarm.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interaction
62