Table of Contents
Advertisement
SUN600-(5KTL, 6KTL)-L0
User Manual
Installation Environment Requirements
●
●
●
Mounting Structure Requirements
●
●
●
●
Installation Angle Requirements
The inverter can be wall-mounted or pole-mounted. The installation angle
requirements are as follows:
●
●
Figure 4-1 Installation angle
Issue 02 (2022-03-10)
The inverter must be installed in a well-ventilated environment to ensure
good heat dissipation.
When the inverter is installed under direct sunlight, the power may be
derated due to the temperature rise.
You are advised to install the inverter in a sheltered place or install an awning
over it.
The mounting structure where the inverter is installed must be fire resistant.
Do not install the inverter on flammable building materials.
Ensure that the installation surface is solid enough to bear the weight of the
inverter.
In residential areas, do not install the inverter on plaster board walls or walls
made of similar materials with a weak sound insulation performance because
the noise generated by the inverter may interfere with residents.
Install the inverter vertically or at a maximum back tilt of 15 degrees to
facilitate heat dissipation.
Do not install the inverter at forward tilted, excessive back tilted, side tilted,
horizontal, or upside down positions.
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
20
Advertisement
Table of Contents
