Table of Contents
Advertisement
SUN600-(5KTL, 6KTL)-L0
User Manual
point of the PV strings. The DC power is then converted into single-phase AC
power through an inverter circuit. Surge protection is supported on both the DC
and AC sides.
Figure 2-7 Schematic diagram
Working Mode
Figure 2-8 Working modes
Table 2-2 Working mode description
Working
mode
Standby
mode
Issue 02 (2022-03-10)
Description
The inverter enters Standby mode when the external environment
does not meet the requirements for starting the inverter. In
Standby mode:
● The inverter continuously detects its operation status. Once the
operating conditions are met, the inverter enters Operating
mode.
● If the inverter detects a shutdown command or a fault after
startup, it enters Shutdown mode.
Copyright © Huawei Technologies Co., Ltd.
2 Product Introduction
14
Advertisement
Table of Contents
