Promate PW2700 Operator's Manual page 6

15° Nozzle – Yellow: This nozzle
delivers a powerful 15-degree spray
pattern for intense cleaning of small
areas. This nozzle should only be used
on areas and materials that can
withstand high pressure.
25° Nozzle – Green: This nozzle
delivers a 40-degree spray pattern and
a less powerful stream of water. This
nozzle should only be used on areas that
can withstand pressure from this nozzle.
40° Nozzle – White: This nozzle
delivers a 40-degree spray pattern and
a less powerful stream of water. This
nozzle can cover a wide area and should
be used for most general cleaning Jobs.
Chemical Nozzle – Black: This nozzle
is used to apply special chemicals and
cleaning solutions. This nozzle produces
the weakest pressure stream. The
Pressure Washer nozzles are stored in
receptacles on a panel mounted to the
handle of the washer. Colors on the
panel identify the nozzle location and
spray panel.
3-6. Nozzles to Spray Wand
 Never place hands in front of nozzle.
Never grasp hose or fittings during
pressure washer operation. Never
attempt to attach or remove spray
wand or hose fittings while pressure
washer system is pressurized.
 Turn off pressure washer and lock
the gun trigger before attempting to
change pressure nozzles.
1. To attach nozzle into female quick-
disconnect spray wand and press to
snap in the nozzle.
2. To detach, slide down slip ring on
female quick disconnect to eject the
nozzle.
3-7. Pressure Pump to Water
Supply
1. Connect the Garden hose to the
water supply and turn water supply
on to fill the hose with water and also
remove any debris in the hose. Turn
OFF water supply.
2. Make sure that the filter inside
pressure washer water inlet is clean
and undamaged. Thread the Garden
hose fitting into water hose inlet.
6