Table of Contents
Advertisement
and release collar. Tug on the hose to make
sure it is secured.
3-3. Pressure Hose to Spray Gun
1. Pull slip ring on female quick-disconnect
fitting of high-pressure hose back.
2. Insert male quick-disconnect fitting on
spray gun into female quick disconnect on
high pressure hose.
3. Release slip ring on female quick-
disconnect and twist. Listen for "click" to
ensure
both
quick
coupled.
4. Pull high pressure hose and spray gun in
opposite direction to ensure they DO
NOT separate.
3-4. Spray Wand to Spray Gun
1. Remove the protective plastic cap at the
inlet of the wand.
2. Thread spray wand onto spray gun.
3. Tighten the nut to secure the wand to
the Gun.
disconnects
are
3-5. Selecting the Right Nozzle
To prevent damage to your surface and
to select and nozzle size for your
application, always start with lowest
pressure
nozzle
size
continue changing to the higher nozzle
size until the best work result is
achieved.
The Pressure Washer comes furnished
with five spray nozzles. Each nozzle is
color coded and delivers a specific spray
pattern and pressure for a particular
cleaning
job.
The
determines the size of the fan spray and
the pressure out of the nozzle.
0° Nozzle – Red: This nozzle delivers
a pinpoint of pressurized water and is
extremely powerful. It covers a small
area of cleaning only, and should only
be directed at surfaces that can
withstand high pressure such as metal
or concrete. DO NOT use this nozzle to
clean wood.
(White)
and
size
of
nozzle
5
Advertisement
Table of Contents
