Maintenance And Storage - Promate PW2700 Operator's Manual

Table of Contents

Advertisement

squeeze the trigger to flush clean water
through the detergent tank and the system
until it is thoroughly clean.
Leaving chemicals and cleaning solutions
Inside the pressure pump could damage It.
Damages created by leaving soaps, chemicals
and cleaning solutions inside the pump can
void the warranty.
Cleaning Tips
• Never use the pressure washer water inlet
to siphon detergent or wax.
• If you have the nozzle too far away from
the surface being washed, the cleaning will
not be as effective.
DO NOT get closer than 6 inches when
cleaning.
6-7. Shutting Down the Pressure
Washer
1. Top stop the engine switch on the side of
the engine to OFF position.
2. Slide Fuel Valve lever to the left to stop
fuel flow to the engine.
3. Turn off the water supply and disconnect
Garden hose from the pressure washer.
4. Squeeze the gun trigger to release any
remaining water in the system.
5. Store spray gun on the side and hoses
inside the hose housing inside the handle.
Allow engine to cool down before folding
handle.
Never tum off the water supply with the
engine running. This will cause the pressure
pump to overheat, resulting in internal
damage.
The pressure washer must be properly
stored.
Refer
7.
Storage.
7. MAINTENANCE AND
STORAGE
7-1. Maintenance
Regular
maintenance
performance and extend life of pressure
washer.
The Pressure Washers' warranty does not
cover items that have been subjected to
operator abuse or negligence. Only by
maintaining pressure washer in accordance
with instructions in this manual will the full
value of the warranty be honored.
Some adjustments will need to be made
periodically to properly maintain the pressure
washer. All service and adjustments should be
made at least one time each season. It is
important that the maintenance chart below
be followed.
Maintenance
and
will
improve
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pw3500

Table of Contents