Assembly; Before You Begin - Kreg KHI-CDIJ Owner's Manual

Assembly

Before you Begin

Note This jig can be used to mount doors for both wall cabinets and base cabinets.
a. Mount your hinges on your doors.
b. Use the chart on page 6 to identify the correct jig setting and shims to use for your desired
overlay (how much your door will overlap your cabinet frame or faceframe).
1
Attach the Support Arm to the Jig
a. Determine the correct orientation of the support arm (D) to the jig (C) for your application.
For left cabinet door mounting, the
support arm should extend to the
left of the jig.
4
D
C
For right cabinet door mounting,
the support arm should extend to
the right of the jig.
D