Pre-Assembly - Kreg KMA3225 Owner's Manual

Pre-Assembly

Review this section before you begin. Ensure you have all tools/materials on hand and
compare the package with the items listed in the Product Description section. If any
item appears missing or lost, do not use this product. Contact Technical Support or
return product to place of purchase.
Recommended Tools/Materials
Clamp
Product Description
B
Part Description
A Shelf Pin Jig
B Fence
C* Drill bit
D Stop collar with set screw
*If replacement or different size drill bits are needed, 1/4" or 5 mm drill bits are available
separately.
**The indexing pin is double ended for both 1/4" and 5 mm shelf pin holes.
Pencil
F
A
Part
E**
D
Description
Indexing pin
F Jig extension
G Hex wrench
H 1/4" or 5 mm Shelf pins (4x)
C
E
G
H
3