Reset To Factory Default Settings Using The Reset Button; Firmware Upgrade; Figure 3.6 Factory Reset Count Down Timer - Asus GigaX1104PS User Manual

GigaX1104PS User's Manual
3. GigaX1104PS will then reboot thereafter to make the factory
default configuration in effect. Note a count down timer such as the
one shown in Figure 3.6 will display to indicate when the reboot
process will be completed.

Figure 3.6 Factory Reset Count Down Timer

3.4.2 Reset to Factory Default Settings using the Reset Button

Sometimes, you may find that you have no way to access
GigaX1104PS, e.g. you forget your password or the IP address
of GigaX1104PS. The only way out in this scenario is to reset
the system configuration to the factory default by pressing the
reset button (located on the rear panel of the router) for at least 5
seconds. The system configuration will be reverted to the factory
default settings after GigaX1104PS is rebooted.

3.5 Firmware Upgrade

ASUSTeK may from time to time provide new firmware running
on GigaX1104PS. All system software is contained in a single file,
called an image. Configuration Manager provides an easy way to
upload the new firmware image. To upgrade the image, follow this
procedure:
54