Table of Contents
Advertisement
Follow the instructions below to configure the settings for print
sharing:
1. Open the Printer Server Setting page by clicking the Setting tab.
Figure 2.4 Printer Server Setting Page
2. Enter a desired system name in the "System Name" text
fi eld.
3. Enter an IP address and subnet mask for GigaX1104PS.
4. (Optional) Enter gateway IP address for GigaX1104PS
if the print sharing service is to be provided to other
networks.
5. Click on [Apply] button to save the changes.
Note: If you change the IP address and the subnet mask, you'll have
to change the IP address of your PC within the network defi ned by
the IP address and subnet entered here. Otherwise, you will not be
able to log into GigaX1104PS.
2.3.3 Install Printer Server Manager
GigaX1104PS supports print sharing service via network. To
provide the printer server service, the printer server manager
program must be installed on each of your computers. The following
sections provide instructions for each supported Microsoft Windows
– Windows 98/ME, Windows 2000 and Windows XP. Note that the
Printer Server Client Utility program runs only on the supported
18
GigaX1104PS User's Manual
Advertisement
Table of Contents
