GigaX1104PS User's Manual
reconnected back to GigaX1104PS when the counter returns to
zero. You may need to manually connect back to GigaX1104PS if
you are not connected back to GigaX1104PS automatically.
Figure 3.11 Reboot Confirmation after Firmware Upgrade
Figure 3.12 Firmware Upgrade Count Down Timer
6. When you are reconnected to GigaX1104PS, check the firmware
version displayed in the System Information page, as shown in
Figure 2.3, to see if the new firmware is properly upgraded. Note
that you may need to close the existing browser window and then
open a new browser window to see the updated information.
57