Port Information - Epson TM-H6000III Development Manual

2.5 Port Information

This section explains the port information for each device.
1) Port information when using serial port
The port information that can be set with the SetupPOS utility is as follows.
Setting Information
Baud rate
Bit length
Parity
Stop bit
Handshake
Output buffer length
Output interval time
The default settings are as shown in the following table.
Setting Information
Baud rate
Bit length
Parity
Stop bit
Handshake
Output buffer length
Output interval time
All CheckScanner settings are exactly the same as the printer.
2) Port information when using parallel port
All CheckScanner settings are exactly the same as the printer.
3) Port information when using USB port
All CheckScanner settings are exactly the same as the printer.
4) Port information when using Ethernet port
All CheckScanner settings are exactly the same as the printer.
4800, 9600, 19200, 38400
7 bits, 8 bits
NONE, ODD, EVEN
1 bit
DTR/DSR
32-1024
0-9999
19200
8 bits
NONE
1 bit
DTR/DSR
1024
2500
4
APPLICATION DEVELOPMENT GUIDE
CheckScanner
Version 3.00 Feb. 2019
Effective Setting Range
Effective Setting Range