3.12 Electronic Logo Function (NVRAM)
The TM-T100M feature an electronic logo function (NVRAM). To use NVRAM,
startup TMFlogo utility from "Device Specific Settings" of SetupPOS utility, and
register image files (BMP style) with NVRAM in advance.
For the details of the registration, please refer to the "Utility User's Manual".
To print image files registered with NVRAM, please use the either of the following
DirectIO:
PTR_DI_FLASH_BITMAP
PTR_DI_FLASH_BITMAP2.
Please refer to the corresponding part of the Section 4 of "EPSON OPOS ADK
MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)" for
detail.
3.13 Printable bitmap types and sizes
The TM-T100M support the following bitmap commands. For the detail, please
refer to the corresponding part of the Section 3 of "EPSON OPOS ADK MANUAL
APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)". The allowance
ranges for bitmaps are as follows.
Bitmap command type
Download bitmap
Raster bitmap
One-line bitmap
X (dot)
1~2040
1~2048
22
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T100M)
Version 3.00 Feb. 2019
Allowance range
y (dot)
1~384
1~2303
No setting range
xy
<= 98304
-