Table of Contents
Advertisement
3.6 Power Condition Reports
The TM-T81M/TM-T81IIM/TM-T81IIM-42C support Power Condition Reports as
follows.
Powered on reporting: Supported
Powered off reporting: Unsupported
3.7 Synchronous Processing
The TM-T81M/TM-T81IIM/TM-T81IIM-42C using Process ID to determine output
completion.
Use of the Process ID allows multiple print commands to be queued to the printer
simultaneously. For this reason, Asynchronous output (AsyncMode = TRUE)
gives a performance improvement.
3.8 Printing Positions
The TM-T81M/TM-T81IIM/TM-T81IIM-42C supports the function for setting
printing position.
Function
Left margin
Printing Position
O: Supported
X: Unsupported
When the left margin setting function is supported, it is possible to specify the
horizontal printing position of the bitmap or barcode by dots unit.
When the printing position settings are supported, it is possible to specify the
horizontal printing position of the text, bitmap, or the barcode to the left, center, or
the right side of the paper.
3.9 Electronic Logo Function (NVRAM)
The TM-T81M features an electronic logo function (NVRAM). To use NVRAM,
start up the TM-T81 utility from "Device Specific Settings" of SetupPOS utility,
and register image files (BMP style) with NVRAM in advance.
To print image files registered with NVRAM, please use the either of the following
DirectIO:
PTR_DI_FLASH_BITMAP
PTR_DI_FLASH_BITMAP2
APPLICATION DEVELOPMENT GUIDE
POSPrinter(TM-T81M/TM-T81IIM/TM-T81IIM-42C)
Receipt
O
O
18
Version 3.00 Feb. 2019
Advertisement
Table of Contents
