Electronic Logo Function (Nvram); Printable Bitmap Types And Sizes - Epson TM-T88VI Series Development Manual

3.12 Electronic Logo Function (NVRAM)

The TM-T88VI models feature an electronic logo function (NVRAM). To use
NVRAM, startup TM-T88VI utility from "Device Specific Settings" of SetupPOS
utility, and register image files (BMP style) with NVRAM in advance.
For the details of the registration, please refer to the "TM-T88VI Utility User's
Manual".
To print image files registered with NVRAM, please use the either of the following
DirectIO:
PTR_DI_FLASH_BITMAP
PTR_DI_FLASH_BITMAP2.
Please refer to the corresponding part of the Section 4 of "EPSON OPOS ADK
MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)" for
detail. The available NVRAM sizes are as follows:
TM-T88VI

3.13 Printable bitmap types and sizes

The TM-T88VI models support the following bitmap commands. For the detail,
please refer to the corresponding part of the Section 3 of "EPSON OPOS ADK
MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)". The
allowance ranges for bitmaps are as follows.
Bitmap command type
Download bitmap
Raster bitmap
One-line bitmap
: 262144 bytes
X (dot)
1~2040
1~2400
23
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T88VI)
Version 3.00 Feb. 2019
Allowance range
y (dot)
1~384
1~4095
No setting range
xy
<= 98304