Specifications - Lexicon Lambda Desktop Recording Studio Owner's Manual

Specifications

SPECIFICATIONS
Microphone Inputs:
Input Impedance:
Phantom Power:
GAIN:
EIN:
Maximum Input Level:
Frequency Response:
THD+N:
Insert Inputs:
Send Level (tip):
Maximum Return Level (ring):
Line Inputs:
Input Impedance:
Maximum Input Level:
Frequency Response:
THD+N:
Instrument Input:
Input Impedance:
Maximum Input Level:
Frequency Response:
THD+N:
Crosstalk:
Line Outputs:
Level:
Impedance:
Headphone Output:
MIDI Interface:
Sample Rate:
Dynamic Range:
A/D/A (24 Bit)
Analog Path:
USB Type B Socket:
Power Requirements:
Dimensions:
Weight:
Lexicon engineers are constantly working to improve the quality of our products.Specifications are therefore
subject to change without notice.
3
(2) Female XLR Pin 2 Hot
600 Ohms balanced
+48 Volt
+50 dB
−120 dB A-weighted @ 50dB gain (150 Ohm source impedance)
+18 dBu
+0, −0.2 dB 20 Hz - 20 kHz, ref. 1 kHz
<.005%, 20 Hz - 20 kHz
(2) 1/4" TRS
+19 dBu maximum
+19 dBu maximum
(2) 1/4" TRS balanced or unbalanced
20 kOhm balanced, 10 kOhm unbalanced
+22 dBu
+0, −0.2 dB 20 Hz - 20 kHz, ref. 1kHz
<.009% A/D, 20 Hz - 20 kHz
(1) 1/4" mono jack
1 MOhm unbalanced
+19 dBu
+0, −0.25 dB 20 Hz - 20 kHz, ref. 1 kHz
<.0125% A/D
<−74dB any input or output to any recording channel, 20 Hz-20 kHz
<−95dB at 1 kHz typical
(2) 1/4" TRS balanced or unbalanced
+19 dBu maximum (+4 dBu nominal input = −15 dbFS)
110 Ohms
(1) 1/8" stereo jack 100 mW per channel at 50 Ohms
5 pin DIN connectors for MIDI in and MIDI out
44.1 kHz or 48 kHz (determined by computer application)
A/D (24 Bit) 104 dB typical, A-weighted, 20 Hz - 20 kHz
D/A (24 Bit) 109 dB typical, A-weighted, 20 Hz - 20 kHz
103 dB typical, A-weighted, 20 Hz - 20 kHz
118 dB typical, A-weighted, 20 Hz - 20 kHz
Version 1.1, Version 1.1 hubs are not supported
USB powered
XXX x XXX x XXX
XXX lbs.