Lexicon Lambda Desktop Recording Studio Owner's Manual page 25

4. Press Rewind and press the Play button to listen to the track you have just
recorded.
5. Turn the Lambda Studio™ Output Level knob to adjust the listening volume,
and make sure the Monitor Mix knob is somewhere in the middle between Direct
and Playback.
To overdub a second track:
1. Click anywhere in the gray area (not on the buttons) of the Track 2 window
(labeled as Audio 02).
2. In the Inspector, click the IN: box and select IN 1 for Track 2's input. (IN 1 relates
to Mic 1 and Line 1, IN 2 relates to Mic 2 and Line 2).
3. In the Track 2 window, the Record Enable button
If it isn't, click it so that it turns red.
4. In the Track 2 window, click the Input Monitoring button
lit.
To set monitor levels for a comfortable listening level:
1. On the front of the Lambda Studio hardware, locate the Monitor Mix knob.
2. While playing back the recording, adjust the Monitor Mix knob to balance the
levels between direct input signal and recording playback. To make the direct
input louder than the recording playback in the headphones, turn the Monitor
Mix knob towards the Direct side. To make the recorded track louder, turn the
Monitor Mix knob towards the Playback side.
NOTE: Changing the Monitor Mix does not affect the recording level, only what
you hear while recording. You can also adjust the playback level and pan position
Recording Using the Microphone/Line Input
should already be red.
so that it is not
25