Read These Instructions To Protect Yourself And Others; General Information - Drader W30000 Instruction Manual & User Manual

1. Read These Instructions to Protect Yourself and Others

Be aware, serious injury or death may result if welding equipment is not properly installed, used, and
maintained. Misuse of this equipment and other practices can be both hazardous and dangerous to the
operator and any persons in the general work area. The operator and supervisor must read, and understand the
following safety warnings and instructions before using this welding equipment.
The Drader Injectiweld is to be operated by qualified people in accordance with this manual. Only authorized
service personnel should perform any maintenance that requires opening the welder housing.
Opening the welder housing voids the Drader Warranty.

2. General Information

Information, presented in this manual should be read, understood and followed for the safe and effective use
of this equipment. Safety instructions specially pertaining to this unit appear throughout this manual,
highlighted by a symbol that identifies levels of hazard. There are also welding tips and hints throughout this
manual that will make your welds better and your welder usage more effective.
Symbols used throughout this manual:
HIGH VOLTAGE
- The lightning flash symbol will alert the user to the presence of
"dangerous voltage" that may be of sufficient magnitude to constitute a risk of electric
shock.
HOT SURFACE
- The heat symbol will alert the user to the fact that they might get a
serious burn if they touch the part.
WARNING / CAUTION
operating and maintenance instructions.
TIP
- The Injectiweld symbol identifies tips and hints to obtain the most efficient
operation of this tool.
- The exclamation point symbol will alert the user to important
Page | 4