Installation - jacarta interSeptor Pro-XP User Manual

2

Installation

Please refer to your QUICK INSTALLATION GUIDE for the initial set-
up instructions for your interSeptor Pro-XP
2.1 Powering the interSeptor Pro-XP
Note: You can select to use either the power adapter or
the 48V DC power source to supply power to the
interSeptor Pro-XP.
Upon successful connection, you can configure the interSeptor Pro-XP
via the web browser from any workstation connected to the same
network of the interSeptor Pro-XP. For further details, please refer to
Chapter 3.
Connect the power connector
9