Network Setting - jacarta interSeptor Pro-XP User Manual

interSeptor Pro-XP
use it for a new interSeptor Pro-XP.
•
Upload Configurations: This field is a button and file type input.
User can select an existing configuration file and upload it to
interSeptor Pro-XP.
•
Upload CA file: This field is a button and file type input. User can
select an existing certificate and upload it to interSeptor Pro-XP.
•
interSeptor Pro-XP Firmware Upgrade: This field is a button and
file type input. User can select a firmware image file and upload
it to interSeptor Pro-XP. When an upgrade is in progress, the
upload button is disabled and the progress elements appear
below the button. A confirmation message displays when
upload button is clicked. After the firmware upgrade is
successful, the interSeptor Pro-XP will be restarted.
•
MCU Firmware Upgrade: This field is a button and file type
input. User can select a MCU firmware image file and upload it
to interSeptor Pro-XP. When an upgrade is in progress, the
upload button is disabled and the progress elements appear
below the button. A confirmation message displays when
upload button is clicked. After the firmware upgrade is
successful, the MCU will be restarted.
•
EMD Firmware Upgrade: This field is a button and file type
input. User can select a EMD firmware image file and upload it
to inSentry3. When an upgrade is in progress, the upload button
is disabled and the progress elements appear below the button.
A confirmation message displays when upload button is clicked.
After the firmware upgrade is successful, the EMD will be
restarted.

5.2 Network Setting

IPv4
•
BootP/DHCP Control: If this field is enabled and a DHCP server is
found, the IP address assigned dynamically from DHCP server.
Available values are Static and DHCP. The default value is Static.
28