Protocol Setting - jacarta interSeptor Pro-XP User Manual

value is "Disabled".
Administrator Password Setting
Use the case-sensitive User Name and Password for Administrator to
log on.
•
Administrator Name: This field defines the name of
administrator. The maximum size is 31 characters. Available
values are alphabetic characters*1 and numerals*3. The
default value is "iStry3".
•
Administrator Password: This field defines the password of
administrator. The maximum size is 31 characters. Available
values are alphabetic characters*1, symbols*2 and
numerals*3. The default value is "admin".
•
New Administrator Password / Retry New Administrator
Password: This field defines the new password of
administrator. The maximum size is 31 characters. Available
values are alphabetic characters*1, symbols*2 and
numerals*3. The default value is blank.

5.5 Protocol Setting

This page lets the user to enable or disable the communication
protocols available in the interSeptor Pro-XP, or alternatively
configure the communication protocol with a different port number.
Advance
Protocols Setting
•
Bootp/DHCP: This field defines whether the DHCP client
will be executed and to obtain a dynamic IP address from
a BootP / DHCP server. Available values are Disabled and
Enabled, default value is Enabled.
•
Ping Echo: This field defines whether interSeptor Pro-XP
responds to ping requests. Available values are Disabled
and Enabled, default value is Disabled.
35