Safety Information - jacarta interSeptor Pro-XP User Manual

Safety Information:

•
Only install the unit in a temperature-controlled indoor area free of
conductive contaminants. Do not place the unit near liquids or in
an excessively humid environment.
• Do not allow liquids/foreign objects to enter the unit.
•
The unit does not contain any user-serviceable parts.
•
Do NOT open the unit.
•
Before shipment, the unit must be completely switched off and
unplugged and all connections must be removed.
•
Before connecting the interSeptor Pro-XP to the power supply,
ensure that the rating of the power source is consistent with the
rating of the power adapter of the interSeptor Pro-XP.
•
Follow the instructions in the full interSeptor Pro-XP manual to
connect the power adapter and avoid improper use of the
equipment.
•
Do not use any organic solutions or corrosive detergents to clean
the exterior of the equipment. To clean the equipment, first turn
off the power. Use a cloth that has been very lightly dampened in
water to clean the exterior.
• Do not use the equipment in the following environments:
i. Humidity higher than 80%.
ii. Temperature higher than 50°C or lower than 0°C.
iii. Near objects which transmit strong electromagnetic waves (e.g.
TV's or radios).
iv. Locations that are subject to violent vibrations.
v. Locations that are damp or that come into contact with water.
Safety Information
3