Table 1. Types MR95H, MR95HT and MR95HP Regulators Body Constructions (continued)
BODY SIZE
DN 50 / 2 in.
- Shaded areas indicate that the construction is available.
- Blank areas indicate that you need to contact your local Sales Office for the availability of the constructions.
1. Meets the chemical and physical requirements of NACE MR0175-2002, NACE MR0103 and NACE MR0175/ISO 15156.
BODY SIZE
TYPE
DN
In.
1.0 to 2.1
15
1/2
1.7 to 5.2
4.8 to 10.3
1.0 to 2.1
1.7 to 5.2
4.8 to 10.3
20
3/4
and 25
and 1
1.0 to 2.1
MR95H
1.7 to 5.2
4.8 to 10.3
0.34 to 5.5
4.1 to 8.3
6.9 to 9.7
40
1-1/2
and 50
and 2
8.3 to 10.3
0.34 to 4.1
3.4 to 8.3
1.0 to 6.9
15
1/2
5.5 to 20.7
1.0 to 6.9
20
3/4
MR95HT
and 25
and 1
5.5 to 10.3
1.0 to 6.9
40
1-1/2
and 50
and 2
4.1 to 17.9
1.0 to 6.9
15
1/2
5.5 to 27.6
1.0 to 6.9
20
3/4
MR95HP
and 25
and 1
5.5 to 27.6
1.0 to 6.9
40
1-1/2
and 50
and 2
4.1 to 20.7
1. Springs meet NACE MR0175-2002, NACE MR0103 and NACE MR0175/ISO 15156 requirements only for applications in which the spring is not exposed to the sour gas.
2. Available in Inconel
.
®
Inconel
is a mark owned by Special Metals Corporation.
®
4
BODY CONSTRUCTION
Without Gauge Port and Control Line
With Control Line but Without Gauge Port
With Gauge Port but Without Control Line
Table 2. MR95 Series Outlet Pressure Ranges and Spring Information