Use; Safety Instructions; Switching On And Off; Securing The Camera During Use - MSA Evolution 6000 Operating Manual

4 Use

4 Use
4.1

Safety Instructions

Check the batteries before and during use
Check whether the batteries are fully charged before using. If not fully charged, the nominal operating time cannot be achieved.
Also check the battery level during use.
For details on charging →
4.11 Battery
4.2

Switching ON and OFF

Switching ON in normal mode, function test
Figure 4 ON/OFF button
1. Press green ON/OFF button for approximately 1 second.
a. Within 5 seconds, the TIC carries out a self-test of the sensor electronics.
Status LEDs under display illuminate according to battery status ( →
The current software version briefly displays.
An image appears after a few seconds on the display.
2. Check camera function:
a. Direct the camera toward an object or person until the thermal image shows on the display.
The camera is now ready for use.
Switching OFF
1. Keep ON/OFF button pressed for approximately 3 seconds until all LED indicators switch off.
2. Release the ON/OFF button as soon as all LED indicators switch off.
The camera is switched OFF.
4.3

Securing the Camera During Use

The camera may be secured to the user in different ways using one of the self-retracting attachment cables.
Charging.
Evolution 6000 Thermal Imaging Camera
4.5.8 Battery Status Indicator).
US
10