MSA Evolution 6000 Operating Manual page 8

Thermal imaging camera
Hide thumbs Also See for Evolution 6000:
Table of Contents

Advertisement

2 Product Warranty
Loaner Cameras
MSA offers a loaner camera program for customers when deemed necessary (extended repair time, critical equipment
replacement, etc.). The loaner camera will not necessarily be the exact model that it is replacing. Contact MSA Fire Service
Customer Service (1-800-MSA-2222 in the US) for additional information and arrangements.
Exclusive Remedy
It is expressly agreed that the original end-user's sole and exclusive remedy for breach of the above warranty, for any tortious
conduct of MSA, or for any other cause of action, shall be the repair and/or replacement, at MSA's option, of any equipment or
parts thereof, that after examination by MSA are proven to be defective. Replacement equipment and/or parts will be provided
at no cost to the original end user, F.O.B. original end-user's named place of destination. Failure of MSA to successfully repair
any nonconforming product shall not cause the remedy established hereby to fail of its essential purpose.
Exclusion of Consequential Damage
Original end-user specifically understands and agrees that under no circumstances will MSA be liable to original end-user for
economic, special, incidental, or consequential damages or losses of any kind whatsoever, including but not limited to, loss of
anticipated profits and any other loss caused by reason of the non-operation of the goods. This exclusion is applicable to
claims for breach of warranty, tortious conduct or any other cause of action against MSA.
Product Registration and Extended Warranties for MSA TICs
Thank you for purchasing an MSA Thermal Imaging Camera. Registering your products with MSA will improve the processing
of any warranty claims and enable you to receive information regarding product updates and new products. Please register
your camera online or purchase an extended warranty at www.MSASafety.com/register.
MSA requires that the camera and accessories be installed, used, and/or maintained as specified in the product instructions.
All TICs and accessories sent in for warranty repair will be inspected for signs of excessive rough handling and operation
significantly beyond specifications in the instructions. The warranty coverage is for material defects and/or faulty
workmanship only. Repair and labor required for normal wear and tear are not covered under the warranty and are the
responsibility of the original end-user.
For information on availability outside the US, contact your local MSA representative.
EVOLUTION Thermal Imaging Camera Extended Warranty
Extended warranties must be processed for EACH Thermal Imaging Camera.
Apply for your MSA Thermal Imaging Camera Extended Warranty coverage online at www.MSASafety.com/register or
phone (1-800-MSA-2222 in the US, other countries: contact information on the last page of this manual) for assistance.
• Extended warranty requests MUST be exercised within the first 6 months from the date of -manufacture. The last three
characters (MYY, or "month-year-year") of the TIC's serial number (located in the battery compartment of the Thermal
Imaging Camera) dictate this timeframe (XX-XXXX-MYY).
• Extended warranty coverage is available up to 36 months after the standard warranty has expired. Select the Extended
Warranty coverage for one, two or three years.
• Extended warranty rates are: one year = $ 1,000.00, two years = $ 2,250.00 and three years = $ 3,750.00.
• Extended warranty and standard warranty both begin from the date of purchase by the end user.
• This Extended Warranty program applies only to MSA Thermal Imaging Cameras. Consumable batteries, battery
chargers and accessories are not covered.
Evolution 6000 Thermal Imaging Camera
US
8

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Evolution 6000 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents