Function code listing
Code
Function Code Name
F01
Select Mode
F02
Restore Mode
F04
Counting Only
F05
Accessory Status
F07
Level 0
F08
Last Image Address
F09
Total Document Count
F10
Level 0 Count
F11
Level 1 Count
F12
Level 2 Count
F13
Level 3 Count
F14
Reset Level Counts
4-4
Following is a listing of the function codes and descriptions.
Allows you to select one of the predefined application
modes. Enter a value from 1 to 18 and press Enter.
Allows you to restore the current application mode to its
default status, provided mode overrides are not saved.
Allows you to count the number of documents entering
the scanner without scanning. Enter 1 to turn Counting
Only on, or 0 to turn Counting Only off and press Enter.
Displays the current status of each accessory installed.
Press the Down arrow to view the status of the next
accessory, or press the Up arrow to view the status of the
previous accessory.
Allows you to define the next document scanned as a
Level 0 document.
Allows you to display the image address of the last
document scanned.
Allows you to display the total number of documents that
entered the feeder (Level 3, Level 2, Level 1 or Level 0).
Press 0 to reset the counter and then press Enter.
Allows you to display the total number of documents that
have entered the feeder as Level 0 documents. Press 0 to
reset the counter and then press Enter.
Allows you to display the total number of documents that
have entered the feeder as Level 1 documents. Press 0 to
reset the counter and then press Enter.
Allows you to display the total number of documents that
have entered the feeder as Level 2 documents. Press 0 to
reset the counter and then press Enter.
Allows you to display the total number of documents that
have entered the feeder as Level 3 documents. Press 0 to
reset the counter and then press Enter.
Allows you to reset all the level counters (Level 0, Level 1,
Level 2, and Level 3) to 0.
Description
A-61070 September 1999