Kodak 5500 User Manual page 92

8-18
Message 3
BC Type =
*XXXXXXXXXXXXX
This display gives the decoded value of the bar code read (including
the *, representing the start character) is greater than 15. To see
the remaining value, press Enter until all characters have been
displayed.
NOTE: For multiple bar codes on a single document, the asterisk
denotes the start of each bar code. However, the asterisk
can also be displayed within the data if for some reason a
character could not be read.
3. When the test is completed, press C to return to normal operation,
or press Stop to remain in the test environment.
A-61070 September 1999