Kodak 5500 User Manual page 33

Code Function Code Name
F70 Length Monitor On/Off
F71 Omit Length Monitor on
the Next Document Only
F72 Skew Monitor
F73 Latched Flag On/Off
F74 Momentary Flag
F75 Footswitch Confirmation
Tone
A-61070 September 1999
Allows you to turn the length monitor on or off. The length
monitor checks the length of the documents scanned
against the predefined minimum/maximum allowable
lengths. Messages and/or confirmation tones alert you if
the document is shorter or longer than the predefined
length.
Allows you to omit length checking on the next document
scanned. Length monitoring will resume on subsequent
documents. Enter 1 to turn on or 0 to turn off, then press
Enter.
Allows you to turn skew detection on or off which monitors
the amount of skew using predefined skew angle(s).
Allows you to set a flag in the image headers which alerts
the host system that this document, and those which
follow, are of special interest. The flag will remain
activated for every document until it is turned off. Enter 1
to turn on or 0 to turn off, then press Enter.
Allows you to set a flag in the image header which alerts
the host system that this document is of special interest.
This flag is set only for that one document. Enter 1 to turn
the momentary scanning flag on, then press Enter.
Allows you to turn the confirmation tone on or off which
informs you when the Footswitch is pressed and/or
released. Enter 1 to turn on or 0 to turn off, then press
Enter.
Description
4-7