Removing Non-Jammed Documents - Kodak 500 User Manual

Removing Non-Jammed
Documents
A-61408 September 1995
After clearing the document path, complete the following steps to
remove all non-jammed documents.
1. Check the transport system for documents lodged in the
document path; green handles and labels indicate operator
accessible areas.
2. Make sure the Horizontal Transport Plate, the Vertical Trans-
port Plate and the three access doors are securely closed.
3. Turn the power on.
4. Press and hold the Jog key to clear any remaining documents
in the transport system. Repeat this step until all documents
are placed in the exit hopper.
5. Reset the image level, image address, and application mode,
if necessary.
6. Re-scan documents in their original order.
6-9